The new Tire Grooving Machine adopts advanced intelligent temperature regulation, voltage overload protection, air cooling technology and low-voltage electric shock technology.The power cord is changed into more tolerant cloth, and the power cord is insulated and waterproof with PV material.The fuselage is made of impact resistant and corrosion-resistant material, and the handle is made of high temperature resistant material, which is easy to use, low power consumption and good thermal effect. Using DC power supply, safe to use. This machine belongs to pulse heating, which can be used after power on.
Small volume, light weight, simple operation, easy to use, uniform heating, high efficiency, time saving and labor saving
The power cord is changed into more tolerant cloth, and the power cord is insulated and waterproof with PV material.The fuselage is made of impact resistant and corrosion-resistant material, and the handle is made of high temperature resistant material, which is easy to use, low power consumption and good thermal effect. Using DC power supply, safe to use. This machine belongs to pulse heating, which can be used after power on.
The blade is designed to be pushed forward before it is powered on. If white smoke is emitted during use, it is normal,But it can't be powered on for a long time, and the blade can't be replaced until it cools down .
The blade is easy to install and disassemble, and the screw slot design is not easy to drop. It is suitable for automobile repair point, 4S shop or factory, and personal use
Tire Grooving Machine Instructions
1. Check whether the power supply meets the standard voltage of 220V of this machine.
2. Please place the machine in a stable place.
3. Turn on the power of the host, adjust the current speed to half position, and see if the working indicator light is on. Adjust the voltage gear to the third or fourth gear (average gear third gear).
4. The blade should not be dry-burned (the knife should not be exposed to burn red during use, otherwise the blade will be easily damaged). The depth of the carving is the same as the depth of the exposed part of the fixed knife.
5. When installing the blade, the two copper heads of the blade clamp are not allowed to be connected.
6. When operating the machine, hold the handle and press the front blade position down. After about three to five seconds, the blade will burn red, that is, the power is turned on. It is recommended not to dry burn for a long time, otherwise the blade will break easily.
7. When working, do not push too hard when cutting rubber. Push forward evenly. At this time, you can adjust the voltage and temperature to the appropriate level according to your usage. It is usually not recommended to adjust to the maximum value. When working, the handle connection line will dissipate heat and will not affect normal use.
Tire Grooving Machine Precautions:
(1) When unplugging the plug, be sure to hold the plug and never grab the power cord and pull it.
(2) Do not place heavy objects on the power supply and do not squeeze the power cord.
(3) If the power cord is damaged, it must be replaced by the manufacturer, its maintenance department or similar professional personnel to avoid danger.
(4) Do not use wet hands to plug or unplug the power plug to avoid plugging or unplugging the power plug.
(5) Do not plug or unplug the power plug in a place where there is a gas leak.
(6) Use a standard, reliable AC grounding socket.
