Tire Changer machine maintenance and precautions

As an important equipment in the automotive maintenance industry, tire changer machines should not be ignored in order to ensure their normal operation and extend their service life.

  1, before maintenance, you must disconnect the power and gas source.

   2, every day after work, you must carefully wipe the machine. Of all the sliding and rotating parts often lubricated.

   3, often check gas-water separator and oil mist. When the water is too much timely release, when the oil is not live is timely replenishment (with 20 or 30 spindle oil)

   4, to ensure that there is sufficient gear reducer (20 # mechanical oil), can see the oil level from the window. Open the plastic cover in the center of the workbench and unscrew the bolts to fill the holes with bolts.

   5, to ensure that equipment is clean, oil cup to ensure that there is a lubricant, water separator regularly drain.

   6, to ensure that the gas supply pressure is 0.8 ~ 1.2Mpa.

• Regularly check whether the connecting bolts of each component are tightened. If any looseness is found, tighten them in a timely manner to ensure the stability of the equipment structure.
• For the mechanical transmission part, it is necessary to regularly add an appropriate amount of lubricating oil to reduce wear and maintain smooth operation.
• Check the pneumatic system of the tire dismantling machine to ensure that there is no damage or leakage in the air pipe, and that components such as the air valve are working properly.
• The moving parts such as the tire dismantling arm and tire pressure shovel should be kept clean to avoid impurities affecting their flexibility and accuracy.
• During use, strictly follow the operating procedures to avoid damage to the equipment caused by rough operations.
• After each use, it is necessary to promptly clean the debris and oil stains on the equipment to keep it clean and tidy.
• Regularly inspect the electrical circuits of the tire dismantling machine to ensure that there are no safety hazards such as short circuits or open circuits.
• For components with severe wear and tear, such as tire removal claws, they should be replaced in a timely manner to ensure the effectiveness and safety of tire removal.
• Establish detailed maintenance records to track the status of equipment and promptly identify potential issues.

Doing a good job in the maintenance and upkeep of tire changer machines can not only improve work efficiency, but also ensure the safety of operators, providing strong support for the smooth operation of automotive maintenance work.

Shengshi Albert CHAN Auto Accessories Co., Ltd. sincerely welcome friends at home and abroad visit our company to enhance friendship and business negotiations. We are willing to work with you to create a brilliant future. www.wheelbalanceweights.com