Wheel Balancing Weights For Alloy Wheels

For aluminum rims, stick on wheel weight are a good choice. This type of wheel balance weight is usually glued to the inside or outside of the rim with high-strength glue.

Its advantage is that the installation process is simple and does not require complex processing or installation operations on the rim.

For example, in an auto repair shop, technicians can easily and accurately stick stick on wheel weight on the aluminum rim according to the imbalance position and required mass detected by the wheel balancing machine.

Because stick on wheel weight can be made relatively small and delicate, and can fit tightly on the rim surface, they have less impact on the appearance of aluminum rims. After installation, it is not very obvious from a distance, and it will not be as abrupt as some clip on wheel weights, which is conducive to maintaining the beauty of aluminum rims.

If a clip on wheel weight is used, it is necessary to judge whether it is used on an aluminum rim by the size of the hook opening.

The opening of the steel wheel hook is about 2.2mm, and the opening of the aluminum wheel hook is slightly larger than that of the steel wheel, about 6mm, so when choosing a clip on wheel weight, confirm with the salesperson whether it can be used on an aluminum rim.