About fe wheel balance weight

Since lead is not environmentally friendly, the wheel balance weight on the market are gradually replaced by iron. Fe wheel balance weight are more environmentally friendly than lead wheel balance weight and have a relatively lower cost than zinc wheel balance weight. Therefore, it is the most popular wheel balance weight material.

Fe wheel balance weight have the following advantages:

1. High safety: Iron is a non-toxic metal and long-term use will not cause harm to human health. In scenes such as car repair, it is safer for operators to contact iron balance weights.
2. Good environmental protection: Iron is a common and recyclable metal, and its production and use process has relatively little impact on the environment.
3. Convenient processing: Ordinary processing equipment can be used for production and processing, and the production process is relatively simple.
4. Low cost: Iron is a widely available and relatively low-priced metal, with low raw material cost and convenient processing, which makes the overall production cost of Fe wheel balance weight lower than that of lead wheel balance weight.
5. Good corrosion resistance: After appropriate surface treatment, such as galvanizing, spraying, etc., iron balance weights can have good corrosion resistance, can adapt to different use environments, and have a long service life48.
6. Strong applicability: It can be processed into various shapes and sizes according to different needs, suitable for various types of wheels and vehicles, and meet different dynamic balance adjustment requirements.
7. High strength: The hardness and strength of iron are relatively high, and it is not easy to deform or damage during use, and can maintain a stable counterweight effect.

The Fe wheel balance weight is usually installed on the rim of the wheel by stick on or clip on to adjust the mass distribution of the wheel so that it remains balanced when rotating at high speed.

Adhesive wheel balance weights can be used on all wheels without restrictions.
According to the processing technology, they can be divided into galvanized spray wheel balance weights and spray wheel balance weight.
According to the weight, they can be divided into

1. Passenger car wheel balance weight

There are 5*12 60g/piece (5+10)*4 60g/piece, 1/4oz*12, 1/2oz/6, 1oz*6, 2oz*2.

2. Truck and bus specifications are 20g, 30g, 50g, 100g, 150.

3.Tapes can be selected from Blue Tape, Red Tape, Paper Tape, 3M Tape, 3M Tape, Norton Tape, White Tape, Lohmann Tape

Clip on wheel balance weigh tusually need to be distinguished according to steel wheels and zinc alloy wheels. The weight ranges from 5g to 300g and can be used for dynamic balancing of passenger cars and commercial vehicles.