Knowledge
-
What is a cross wrench called?
What is a cross wrench A cross wrench, also known as a lug wrench or wheel wrench, is a tool designed for installing and removing lug nuts on automotive wheels. The word "cross" in the name comes from the cross-shaped configuration of the tool. It usually has four handles, each of which extends ... -
Can you patch a tire sidewall
The answer is No. The tire sidewall is a relatively weak part of the tire. Compared with the tire tread, the sidewall is more difficult to repair and requires higher safety. The tire sidewall is mainly composed of rubber and cord layer. The cord layer is woven from fiber cords, and its fu... -
Tire Changer FAQs
About Tire Changer FAQ Why are the prices lower than the big brands? Compared to the big brands, our marketing and promotion expenses are very low, and we invest the funds into production, development and design. The fully automatic integrated production line perfectly solves the generation of ... -
Car Lifts FAQs
What is the required ceiling height for the car lift? The lifting height of a two-post lift is between 1.8 and 2.5 meters. If we consider that the height of an ordinary car is about 1.4 to 1.5 meters, the total height of the vehicle after the two-post lift is fully lifted may reach about 3.5 to ... -
Car Lift Concrete Slab Requirements
Shengshi Weiye strongly recommends that you consult a concrete specialist early in the process of planning your car lift installation. The concrete specialist will tailor these recommendations based on national and regional building codes as well as local weather conditions, soil composition, fou... -
Wheel Balancing Weights For Alloy Wheels
For aluminum rims, stick on wheel weight are a good choice. This type of wheel balance weight is usually glued to the inside or outside of the rim with high-strength glue. Its advantage is that the installation process is simple and does not require complex processing or installation opera... -
ls it hard to change tires yourself?
It is somewhat difficult to change a tire by yourself, but if you have a certain amount of automotive knowledge and hands-on ability, you can try it. 1.Tool preparation Replacing a tire requires some specific tools, such as a jack, socket wrench, etc. For people who are not familiar with car ma... -
About Tire Valve
Tire Valve Introduction The tire valve is installed on the tire to fill and discharge gas and maintain tire pressure. It is one of the important components for safe driving of the car. It is mainly composed of the tire valve body, tire valve core and tire valve dust cap. Tire valve body... -
Are adhesive wheel weights only used on steel wheels?
Adhesive wheel weights are not only used for steel wheels. Adhesive wheel weights can be used for steel wheels because the surface of steel wheels is relatively rough and the Adhesive wheel weights can adhere to them better. &n... -
About Tire Changer
Introduction of tire changer A tire changer, also known as a tire changer, is a device specifically used to remove and install automobile tires. Currently, there are vertical tire changers, horizontal tire changers, and vehicle-mounted tire changers on the market. Structural composition... -
About Post Lift
Post Lift Introduction The post lift is an important equipment used for car repair and maintenance. It can lift the car to a certain height, which is convenient for maintenance personnel to inspect, repair and maintain the bottom of the vehicle. 1.Types of post lift ① Two-post lift: It con... -
About Wheel Balancer Machine
Introduction A Wheel Balancer Machine is a device used to detect and correct wheel imbalance. It measures the wheel imbalance, determines the location and size of the imbalance, and then corrects the wheel imbalance by adding a wheel balance weight. Its working principle is based on the centrifu...