Welcome to Cangzhou Shengshiweiye Automobile Accessory Co.,Ltd!

Home > News Center > Company News

Product
News Center

Tips for stick on wheel weights

times   2018-12-28

Tips for stick on wheel weights

1.Choose the appropriate detergent and carefully clean the surface of the hub with a clean soft cloth to remove impurities and dust on the surface of the rim.

NOTE: Be sure the temperature of the ambient temperature and the hub of the wheel weight is not less than 16 deg.

2.After cleaning the hub, place the wheel weights on the rim, check that the arc of the rim is suitable for the balance weight, and retain the protective film of the back strip when the balance weight is placed. The radian of wheel weight curvature should be at least parallel to the radius of the rim.

3.Wheel weight opened rear surface protective film strip, the balance weight is placed on the rim. When placing the balance weights, apply force from the middle of the balance wheel weights to the ends without lowering the pressure at 100 kPa.

4.After pasting the balance weight, continue to press from the middle of the wheel weights to both ends. The adhesion of the wheel weights tape reached 80-90% after about 24 hours, and after 72 hours, the adhesion reached 100%.



Copyright © 2007-2015 Shengshiweiye Auto Parts Co., Ltd.