Welcome to Cangzhou Shengshiweiye Automobile Accessory Co.,Ltd!

Home > News Center > Company News

Product
News Center

How to use the paste balance block correctly

times   2018-10-11

How to use the paste balance block correctly

Adhesive/stick-on wheel balance weight is the mostly used kind of wheel weigh. What is the usage method?

Let us introduce it below:

1. After cleaning the wheel rim, place the adhesive wheel balance weight on the rim and check that whether the radian of the rim is suitable for the adhesive/stick-on wheel balance weight or not. The protective film of the back of adhesive wheel balance weight remains when the it is placed. The radius of the balance block curvature should be at least parallel to the radius of the hub. The radian of the wheel weight curvature should be at least parallel to the radian of the rim.

2.Choose the appropriate cleaning detergent (such as 70% Isopropyl alcohol solution). Carefully clean the rim surface with a clean and soft cloth to remove impurities and dust from its surface. Note: Make sure that the ambient temperature of wheel weight and the temperature of the rim are not lower than 16 °C.

3.After pasting the adhesive wheel weight, continue to press it from the middle sides to both ends. The adhesion of wheel weight reached 80-90% after about 24 hours. And after 72 hours, the adhesion reached 100%.

4.Uncover the protective film on the back of the wheel weight and place it on the rim. When placing the wheel weight, the force should be applied from the middle part to both ends at a pressure not lower than 100 kPa.

The above is the method used by our company to summarize the use of adhesive/stick-on wheel balance weight. If you have any other questions, you can contact us and call us. Cangzhou Shengshiweiye looks forward to cooperating with you!


Copyright © 2007-2015 Shengshiweiye Auto Parts Co., Ltd.